SNR 23122EMW33 Axial roller bearing

Max operating temperature, Tmax:120 °C; Nlim (grease):2,500 rpm; Nlim (oil):3,300 rpm; a:21.64 mm; Fatigue limit load, Cu:17.3 kN; r1a max:1.5 mm; Y0:0.95; Characteristic cage frequency, FTF:0.47 Hz; Characteristic outer ring frequency, BPF0:16.85 Hz; Rating life coefficient, A2:1.9;

db - Cone Backface Backing Diameter:44.45 mm; B - Cone Width:19.583 mm; Bearing Weight:0.30 Kg; r - Cup Backface To Clear Radius2:0.00 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; e - ISO Factor8:0.38; Cone Part Number:14125A; D:69.012 mm; Aa - Cage-Cone Backface Clearance:0.5

C0r - Static Load Rating:10.6 kN; Bore Size d:60 mm; Outside Ring Width B:10.000 mm; Features:Contact Seals; Outside Diameter D:78.000 mm; Clearance:C3; Cr - Dynamic Load Rating:11.5 kN; Radius Rs min:0.300 mm; Oil Limiting Speed:9400 rpm; Weight:0.094 Kg;

B - Outer Ring Width:280.000 mm; Da - Outer Ring Backing Diameter:656.000 mm; Cg - Geometry Factor8:0.0983; Reference Thermal Speed Rating (Oil)7:260; Y2 - ISO Factor6:1.84; Y1 - ISO Factor5:2.79; C0 - Static Radial Rating:12900000 N; D:720.000 mm; Reference Thermal Speed Rating (Grease):250; Design

Seal:Silicone; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Tapered hole adapter; Basic Load Rating, Static Rating(N):15400; d:25; Bearing Unit, Type:Round flange shape; RoHS:6; Fit:J7; Unit, Type:Insert Bearing Unit; Days to Ship:Quote;

Inner/Outer Ring Material:Steel; High-Speed Steel:Standard; Symbol of Bearing Ring Shape:No symbol: Internal; Specifications:Standard; D:80; Rolling Element Material:Steel; Cylinder shape (suffix symbol: X):No; Format symbol:N (double brims for; Large-capacity type:Standard; Specifications/Environme

Number of Bearings:Double; Width T(mm):40 ～ 70; Bearing Retained:No; Flange Shape:Square Type; Bearing Retained:No; RoHS:6; Number of Bearings:Double; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):12;

Cg - Geometry Factor8:0.156; r - Cup Frontface To Clear Radius2:0.06 in; Y - ISO Factor1:1.49; K - Factor3:1.45; e - ISO Factor4:0.4; D:15.5 in; G1 - Heat Generation Factor (Roller-Raceway)7:1450; G2 - Heat Generation Factor (Rib-Roller End):201; Y2 - ISO Factor6:2.5; Y1 - ISO Factor5:1.68;

Float:0.083 in; Grease Lubrication - B/C/O Seal:600 rpm; Locking Style:Double V-Lock; Full Timken Part Number:QVVPX22V311SB; Oil Lubrication - M/N Seal:900 rpm; Dimension D Max:14.00 in; Dimension G:5.5000 in; C0 - Static Load:147000 lb; e - Geometry Factor:0.25; Dimension C:5.5 in;

RoHS:6; Volume Discount:Available; Seals:ZZ (Double Shield); Bearing I.D. d(mm):40; Width T(mm):27; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Shape:Flange Type; Number of Bearings:Single;

Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; Seal, Shield Symbols:ZZ; Retainer Type:Punching; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):57500; Types:16**/6*** series; Load Direction:Radial; Size Standards:Metric System; Type:Ball;

Retainer Type:Punching; Size Standards:Metric System; Preload Mark:CM; D:52; Bearing Style:Rubber Sealed; Inner/Outer Ring Material:Steel; d:25; Number of Raceway Ring Rows:Single Row; Basic Dynamic Load Rating(N):14000; Days to Ship:6 Days;

A5:39.7 mm; SW:6 mm; s1:32.55 mm; d:65 mm; Recommended tightening torque for set screw:33 Nm; Designation of bearing:UC213G2L3; S:25.4 mm; T max.:100 °C; T min.:-20 °C; A3:2.5 mm;

Type:Bearings with Housin; Number of Bearings:Double; Bearing Part Number:6006; Seals:ZZ (Double Shield); Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Flange Shape:Compact Type; Flange O.D. H(φ):96;

C0 - Static Radial Rating:160100 N; Full Timken Part Number:2MM222WICRDUH; Design Units:METRIC; da - Inner Ring Backing Diameter:126.400 mm; Ball Type:STEEL; do - Ball Diameter:28.575 mm; Ce - Dynamic Radial Rating1:194900 N; Precision Class:ISO P4S (ABEC 7/9); Contact Angle:15 º; Da - Outer Ring Ba