ISO NX 35 Z Compound bearing

B1:30.9 mm; L:108 mm; T min.:-20 °C; C0:7.88 kN; T max.:200 °C; C:14 kN; H1:2.8 mm; A:31.7 mm; B:21.4 mm; J:86 mm;

B:27 mm; N:11,5mm; Z:42 mm; H:124 mm; e:19 mm; C:14 kN; L:70 mm; C0:7.88 kN; s1:13.5 mm; Designation of bearing:US205G2T04;

Weight:2.27 kg; T min.:-20 °C; d1:62 mm; Designation of housing:PA209N-; L:120 mm; Z:24.4 mm; B1:56.3 mm; H2:108 mm; s1:39.7 mm; C:31.85 kN;

A:70 mm; Dz:95 mm; B:49.2 mm; N1:25 mm; d:41.28 mm; S:19 mm; G:M6x1; Designation of bearing:UC209-26G2L4; C:31.85 kN; Z:70.2 mm;

T min.:-20 °C; S:19 mm; Recommended tightening torque for set screw:11.5 Nm; L:137 mm; A2:52.2 mm; N:16mm; C0:20.8 kN; Z:56.3 mm; s1:24.6 mm; T max.:100 °C;

T max.:100 °C; Recommended tightening torque for set screw:22 Nm; S:14.9 mm; G:M6x1; Weight:4 kg; T min.:-20 °C; C:52.5 kN; s1:26.85 mm; A2:67.8 mm; d:60 mm;

Flinger Material:Steel; Bearing Family:Setscrew Ball Bearin; Ball Bearing Housing Series:204 Series; Flinger Type:Rubberized; Bearing Outer Ring Material:Steel; Bearing Series:204 Series; Housing Material:Cast Iron; Ship Weight:1.7 LB; Bearing Insert Material:Steel; d:0.6250 in;

d:41.28 mm; D:85 mm; C1:6.8 mm; SW:3.97 mm; m:8 mm; Weight:0.78 kg; G:5/16-24UNF; B:49.2 mm; S:19 mm; T min.:-20 °C;

N:10mm; J1:40 mm; H:102 mm; d:20 mm; J:78 mm; T max.:100 °C; B:31 mm; C0:6.65 kN; A1:12 mm; s1:15.5 mm;

d:31.75 mm; B:38.1 mm; H:85 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; s1:19.05 mm; A:27 mm; T min.:-20 °C; S:15.9 mm; A5:22.2 mm;

Max operating temperature, Tmax:170 °C; Fatigue limit load, Cu:0.13 kN; Da max:28 mm; Brand:NTN; f0:12.7; Min operating temperature, Tmin:-35 °C; Characteristic outer ring frequency, BPF0:2.62 Hz; B:10 mm; Mass:0.04 kg; rs min:0.6 mm;

Nlim (grease):3,800 rpm; Radial clearance class:CM; Characteristic rolling element frequency, BSF:5.26 Hz; da min:68 mm; rs min:1.5 mm; ra max:1.5 mm; B:22 mm; Characteristic inner ring frequency, BPFI:5.92 Hz; D:110 mm; Brand:NTN;

A1:44 mm; C0:40 kN; N1:28 mm; G:R1/8"; A:65 mm; T max.:100 °C; T min.:-20 °C; H1:27.5 mm; H2:156 mm; Weight:6.24 kg;

C0:11.2 kN; Designation of bearing:UC206-19G2T04; N:12mm; J:83 mm; A:31 mm; Z:27.3 mm; Recommended tightening torque for set screw:3.7 Nm; A2:40.2 mm; L:108 mm; C:19.5 kN;

N:M10; H:36.5 mm; J:56 mm; T max.:100 °C; A:38 mm; s1:17 mm; B:34 mm; T min.:-40 °C; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:UC205-16G2T04;